11
Foot plate: Flatbed machines
BACK
00012V40-GB-W
AR
TUNG FREIARM-FLACHBETTMASCHINEN_-_2022-09-27 - DC
To turn the main/bottom shaft by hand, the brake has to be released.
Switch on the machine and use the relevant control function to release
the brake for this purpose (see
Main shaft brake
).
De-energize the machine again after greasing.
Grease connecting rod
• The lubrication points of the connecting rod are marked by arrows in the drawing
below. Grease these locations once every six months.
Fig. 6:
Foot plate, connecting rod lubrication points
• Reinstall the stitch plate.
• When installing, align the stitch plate so that the
needle hole is located centrally
under the needle
.
• Turn the handwheel to make certain that the active needle enters the middle of´the
needle hole.
Every six months:
