13
Cylinder arm
BACK
00012V40-GB-W
AR
TUNG FREIARM-FLACHBETTMASCHINEN_-_2022-09-27 - DC
Grease drive wheel
• Helical gear wheel
Fig. 8:
Cylinder arm, thread trimmer drive wheel
To turn the main/bottom shaft by hand, the brake has to be released.
Switch on the machine and use the relevant control function to release
the brake for this purpose (see
Main shaft brake
).
De-energize the machine again after greasing.
Grease connecting rod
• The lubrication points of the cylinder arm are marked by arrows in the drawings
below. Grease these locations once
every six months
.
Front bearing of thread trimmer
connecting rod.
Fig. 9:
Cylinder arm, connecting rod lubrication points
Every three months:
Every six months:
