manualshive.com logo in svg

Zoom F6, Operation Manual

Share
Download
Zoom F6 Operation Manual Download Page 8

08

Connecting mics/other devices to Inputs 1–6

Connect dynamic and condenser mics with XLR plugs to Inputs 1–6.
Phantom power (+24 V/+48 V) can be supplied to condenser mics. 
(

→

 P. 78)

Dynamic mic

(XLR cable)

Condenser mic 

(XLR cable)

NOTE

When disconnecting an XLR cable, pull the XLR plug while pushing the con-
nector lock release button.

Connecting line level equipment

Connect XLR cables from keyboards and mixers directly to Inputs 1–6.
Direct input of passive guitars and basses is not supported. Connect 
these instruments through a mixer or effects device.

(XLR cable)

Keyboard

(XLR cable)

Mixer

The   can record 6 individual tracks that correspond to Inputs 1–6 and a stereo mix of these inputs with left and right tracks.
Mics and the outputs of instruments and audiovisual equipment, for example, can be connected to Inputs 1–6 and recorded to tracks 1–6.

Connecting mics

Summary of Contents for F6








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands