manualshive.com logo in svg

Zoom F6, Operation Manual

Share
Download
Zoom F6 Operation Manual Download Page 2

02

Notes about this Operation Manual

You might need this manual in the future. Always keep it in a place where 

you can access it easily. The contents of this document and the specifica-

tions of the product could be changed without notice.

◎

 Windows® is a trademark or registered trademark of Microsoft® Cor-

poration. 

◎

  Mac, macOS, iPad, iPhone and iPod touch are trademarks or registered 

trademarks of Apple Inc. 

◎

 The SD, SDHC and SDXC logos are trademarks. 

◎

  The Bluetooth® word mark and logo are registered trademarks of Blue-

tooth® SIG, Inc. and these marks are used under license by Zoom Cor-

poration. 

◎

  Other product names, registered trademarks and company names in 

this document are the property of their respective companies. 

Note:  All trademarks and registered trademarks in this document are for 

identification purposes only and are not intended to infringe on the 

copyrights of their respective owners. 

  Recording from copyrighted sources, including CDs, records, tapes, live 

performances, video works and broadcasts, without permission of the 

copyright holder for any purpose other than personal use is prohibited by 

law. Zoom Corporation will not assume any responsibility related to in-

fringements of copyrights.

Summary of Contents for F6








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands