manualshive.com logo in svg

Zoom F6, Operation Manual

Share
Download
Zoom F6 Operation Manual Download Page 141

141

NOTE

•

• AIF with Rec cannot be used with the following settings and functions.
 

- Sample rate settings other than 44.1/48 kHz 

 

- SD card reader (

→

 P. 136) 

 

- Audio interface (

→

 P. 138) 

- 

 (

→

 P. 143)

•

• A driver is necessary for use with Windows. Download the driver from the 

ZOOM website (www.zoom.co.jp/).

•

• When AIF with Rec is set to On, the sample rate cannot be changed.

•

• When AIF with Rec is set to On, files with sample rates that differ from 

the 

 setting cannot be played.

•

• Set the input source to USB1–4 to monitor sound played back from the 

computer (

→

 P. 78) or select USB1–4 in the output routing (

→

 P. 106, 

P. 109, P. 110).

■

 Disconnecting

1.

 Press  .

2.

 Use   and 

 to select 

Off

, and press 

.

3.

  Disconnect the cable from the computer and the  .

Summary of Contents for F6








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands