Zoom 1077 Series User Manual Download Page 70

Page: 70 / 78

Wireless-N USB Adapter

wireless network. Make sure that your security key is the same –
remember that the keys are case-sensitive.

Check your TCP/IP settings by scrolling down to

Appendix A

and

following the instructions.

If the adapter still does not work, uninstall the software and then re-
install it. To do this, first go to the notification area of the taskbar
(commonly found on the bottom right corner of your desktop), right-
click and select the

Safely Remove Hardware

icon. Highlight

USB

Mass Storage Device

and click

Stop

. In the next screen, click

Then click

again and then click

Close

to exit the window. Now,

you can physically remove the USB adapter from the USB port.
Then select

Start

All Programs

Zoom Wireless-N USB

Uninstall

Zoom Wireless-N USB

. Now you can re-install the Wireless-N USB

software by following the instructions at the beginning of this manual
by starting from

To install the Adapter

on page 6.

Mac users:

To uninstall, follow the instructions below.

•

Insert the CD that came with the package into your CD

or DVD drive. Open the folder associated with your Mac
OS X (either 10.3, 10.4, or 10.5)

•

Select

the

Uninstall

icon and double-click to open the

file. Follow the instructions on the screen.

•

Restart

your

computer.

•

Now, unplug the Adapter.

•

If you want to reinstall, follow the installation instructions

in Section 4:on page 35.

If the above solutions do not work, consult Technical Support.
Please see

Appendix C: Zoom Technical Support Services

on page 71.

Summary of Contents for 1077 Series















































































Search results

Summary of Contents for 1077 Series

Reviews:

Brands by name

Popular brands

Zoom 1077 Series, User Manual

Search results

Summary of Contents for 1077 Series

Reviews:

Brands by name

Popular brands