ZOLL Base Powercharger 4x4, Service Manual

Page: 66 / 75

DISASSEMBLY PROCEDURES
VII-15
6. REMOVING THE BATTERY HARNESS
AND CONTACT PINS
TOOLS REQUIRED:
•
No. 1 Phillips head screwdriver
1. Remove the Base Pan as described on page VII-3.
2. Remove the Main PCB as described on page VII-5.
3. Cut two (2) tie wraps.
4. Remove the twelve (12) Battery Contact Pins securing the Battery Harness
to the Upper Housing.
5. Remove the Battery Harness.
INSTALLING THE BATTERY HARNESS AND BATTERY CONTACT PINS
TOOLS REQUIRED:
•
No. 1 Phillips head screwdriver
1. Reverse steps 3 thru 5 above.
2. Install the Main PCB as described on page VII-5.
3. Install the Base Pan as described on page VII-3.
Note: Screws (above) to be torqued 7-9 inch pounds.