Alarms
5-6
www.zoll.com
906-0330-01-01 Rev. D
High Priority Alarms
Service Code
Alarm Name/Mitigation/Resolution
1001
Self Check Failure
Alarm triggers when the vacuum pump fails to operate or fails to provide the flow
required to deliver a vacuum.
Mitigation/Info: Pneumatic System: Vacuum, Manually Aspirate Patient,
**Contact Service Center*
1010
Self Check Failure
Alarm triggers when the bleed valve fails to reduce the applied vacuum
Mitigation/Info: Manually Aspirate Patient, **Contact Service Center*
1140
Ambient Temperature Fault
Alarm occurs when the internal device temperature exceeds 80 °C (176 °F)
Mitigation/Info: **Monitor Patient and Aspirator**
1052
Self Check Failure
Communication between the pressure sensor and SAM is lost. When this
happens, replace the aspirator and contact the service center for additional
information.
Mitigation/Info: Pneumatic Sensor: Vacuum Pressure, Manually Aspirate Patient,
**Contact Service Center**
1172
Self Check Failure
Alarm occurs when the 5 volt power bus fails to provide the required voltage. If
this failure occurs, replace the aspirator and contact the service center for
additional information.
Mitigation/Info: Power System, Manually Aspirate Patient, **Contact Service
Center**
1173
Self Check Failure
Alarm occurs when communication fails between one of the subcomponents and
the host processor. If this failure occurs, restart the aspirator, replace the
aspirator and contact the service center for additional information.
Mitigation/Info: Internal COMM, Manually Aspirate Patient, Backup Aspirator
**Contact Service Center**
1175
Self Check Failure
Alarm triggers when the internal communication bus and the host are not able to
communicate with the sub-assemblies. If this failure occurs, restart the aspirator,
replace the aspirator and contact the service center for additional information.
Mitigation/Info: Internal COMM, Manually Aspirate Patient, **Contact Service
Center**
