ZOJE 9610, Operation Manual

Page: 56 / 138

9.03.18
mnopOÒ²nɁ‚
Synchronization of roller presser and feed wheel
9.03.18
mnopOÒ²nɁ‚
Synchronization of roller presser and feed wheel
Cî
aN uv
'D，”wOw{|ÆÔË˝DËNuõÛ 30
uvBo´。
Cî
aN uv
'D，”wOw{|ÆÔË˝DËNuõÛ 30
uvBo´。
Requirement
30 needle penetrations After in a strip of leather the total length from the
first the the last penetration should be the same, both in the lower and the
upper leather layer.
Requirement
30 needle penetrations After in a strip of leather the total length from the
first the the last penetration should be the same, both in the lower and the
upper leather layer.
● wPduv“ ”。 3
● "°†|n，N u '。 30
● xy、w{| uv。
● [«Cïë （äå ）。
1 2
● “ ” Set stitch length 3 .
By turning the balance wheel, let the needle enter . ● 30 times
Compare the total sewn length of the lower and upper leather layer. ●
Adjust clamp (screw ) according to the . ● 1 2 Requirement
● wPduv“ ”。 3
● "°†|n，N u '。 30
● xy、w{| uv。
● [«Cïë （äå ）。
1 2
● “ ” Set stitch length 3 .
By turning the balance wheel, let the needle enter . ● 30 times
Compare the total sewn length of the lower and upper leather layer. ●
Adjust clamp (screw ) according to the . ● 1 2 Requirement
ïë fˆ‰K)_Ëtã。 1
1 Clamp must not be positioned diagonally to the rock shaft.
ïë fˆ‰K)_Ëtã。 1
1 Clamp must not be positioned diagonally to the rock shaft.
‚ Adjustment ‚ Adjustment
9-21