H0491600.B EN - 2014/11
9
•
The
LED and the current date and time flash. This is a reminder of the current date and time you entered in order
to help you to programme. Press
to start programming.
If the
LEDs flash, this means that the time setting is not complete. To continue with the cleaning cycle
programming, it is essential to set the time first. To do this follow the instructions in § 4.1.
•
Select the day to programme using the and
buttons.
•
Validate using the
button.
• Once the day has been memorised, the hour flashes:
.
•
Select the hour to programme using the and
buttons.
•
Validate using the
button.
• Once the hour has been memorised, the minutes flash:
.
•
Select the minutes to programme using the and
buttons. Minute programming operates in quarter hours (Exam
-
ple : 12h00
12h
15
12h
30
12h
45
…).
•
Validate using the
button. The next day starts flashing to let you programme it if necessary.
.
•
A short press on
or
exits from the menu.
To cancel programming use the
button:
• Long press "on the settings menu": deletion of the programming for the day that is flashing.
• Long press "outside the settings menu": deletion of all the programming.
The display switches off for 1 second to indicate that the programming has been deleted.
5.4 Displaying the programmed cycles
•
Press the
button quickly. Each day's programme will be displayed for 3 seconds:
6. Using the remote control
(OV 3500 - RV 4550 - RV 5500)
By default, the remote control is already synchronised with the control box.
• Respect the battery polarity.
• Do not recharge or dismantle the battery, or throw it into the fire.
• Do not expose it to high temperatures or direct sunlight.
6.1 Switching on the remote control
•
Press and hold (around 3 seconds)
.
The screen displays the remote mode:
For the communication between the control box and the remote control to be optimal, make sure to place the
control box on the caddy. Orient the control box towards the pool, and make sure there are no obstacles be-
tween the control box and the pool.
The frequency of the flashing of the led located on the remote control indicates the reception quality. If the
LED flashes quickly, reception quality is OK, otherwise see
§ 8.4.
6.2 Piloting the cleaner
• Hold the remote control unit and move it in the desired direction
using the movements illustrated opposite:
Forward
Backwards
Right turn
Left turn
Stop
