H0491600.B EN - 2014/11
8
EN
4.5 Stopping the cleaner
•
Press the
button on the control box.
•
If you want to stop the cleaner when "remove from pool" mode is active, press the
button quickly to stop the
cleaner and the control box.
RV 4550 - RV 5400 - RV 5470 - RV 5500 - OV 3500 - : The control box switches to standby after 10 minutes and
the screen is switched off.
Just press any key to exit standby mode. Standby mode does not stop the cleaner if
it is in a cleaning cycle.
4.6 Storing the cleaner
•
Take your cleaner out of the water at the end of the cleaning cycle.
•
The behaviour of the robot is strongly impacted by the tangling of the cable. Please untangle the cable and lay it out in
the sun so that it returns to its original shape.
• Do not leave the control box in direct sunlight after having used the cleaner.
• If you have the caddy, place the cleaner vertically in the position provided for it to dry out quickly. Then wind up the
floating cable on the caddy handle to avoid the cable becoming tangled up.
5. Programming cleaning cycles for when you are away
(RV 5400 - RV 5470 - RV 5500)
It is not recommended to unplug the power cord once the programmed cleaning cycles have completed as
this will delete the time settings. The time setting will be saved for approximately 2 minutes if the power
cord is disconnected.
5.1 Setting the time
• To set the time, press and hold the
button for around 3 seconds.
•
The days of the week
then the LEDs
start to flash.
•
Select the current day using the and
buttons.
•
Validate using the
button.
• Once the day has been memorised, the hour flashes:
.
•
Select the current hour using the and
buttons.
•
Validate using the
button.
• Once the hour has been memorised, the minutes flash:
.
•
Select the current minutes using the and
buttons.
•
Validate using the
button.
• The weekly programming setting menu appears, if you only want to set the time you can exit the menu by pressing
or
.
5.2 Displaying current time and day
•
Press the
button quickly. Display for 5 seconds:
.
Displaying the current time and day is not possible while the cleaner is running a cycle
5.3 Programming cleaning cycles
•
You can create up to
7 cleaning cycles
, either as 7 cycles in a row, or as the same cycle repeated over several
weeks (example: every Wednesday and Saturday for 3 weeks).
• After completion of the 7th cycle the
LED will turn off.
• Before you programme the cleaning cycles, select the type of cycle you want (see § 3):
•
(OV 3500 - RV 4400 - RV 4460 - RV 4550 - RV 5400 - RV 5470)
•
(RV 5500)
•
To programme a cycle, press and hold the
button (around 3 seconds). The LED stops flashing
.
• The days of the week flash twice.
