H0491600.B EN - 2014/11
4
EN
For optimal performance, place the control box in the centre of the pool, following the safety conditions relat-
ing to electrical connection (see § 1.6).
1.6 Electrical connection
- Use of an electrical extension is prohibited when connecting the control box.
- Choose a dry, flat place free of any objects that may damage the underside of the control box.
- Place the control box on the caddy at a distance of at least 3.5 metres from the edge of the pool, avoid plac-
ing the control box in direct sunlight.
• Unscrew the protective cap (1).
• Connect the floating cable to the control box and lock it into place: firmly tighten the ring by
turning it clockwise
. Make sure the connector is sufficiently pushed into place. If this is not
the case repeat the operation (2).
•
Connect the mains cable. Only connect the control box to a power outlet protected by a 30
mA maximum ground fault circuit breaker
(if in doubt contact a qualified electrician)
.
Don’t forget to screw the protective cap back on if you unplug the control box power
cord.
Make sure that you only screw the connector ring to avoid damaging the floating
cable.
Make sure that you screw the connector fully to protect it against any water getting
in.
1
2
