9
3. Use
3.1 User interface presentation
TRi
TRi Expert
Access the user menu
or return
From the home screen: increase or reducti on in disinfectant producti on.
On the user menu: navigati on in the menu opti ons and value changes when a choice is
proposed.
Validate a selecti on
or access a sub-menu
Start or stop
disinfectant producti on
Acti vate super-chlorinati on for a total period of 24 hours (blue indicator on)
Blocks disinfectant producti on at 10% (blue indicator on)
FLOW
Red indicator showing the absence of fl ow
POWER
Blue indicator showing
disinfectant producti on (fl ashes if an error message is displayed, see
“5. Troubleshooti ng”)
SALT
SALTS
Orange indicator showing a water conducti vity problem (not enough salt, water too cold, etc.)
If the language displayed on the screen when the chlorinator is fi rst powered is not appropriate, see “3.2.5
Language Menu”.
3.1.1 “Boost” mode
In certain cases your pool may need higher than normal chlorinati on (stormy weather, high number of bathers, etc.). The
“Boost” mode is used to quickly increase disinfectant
levels.
•
Press the
butt on: “BOOST” is displayed on the screen and 100% disinfectant producti on starts.
•
When “Boost” mode is acti vated, the electrolyser operates at a 100% disinfectant producti on level for a total
24 hours. The number of days will therefore depend on the fi ltrati on operati ng ti mes. The appliance’s operati ng
ti mes (see “«3.2.2 Programming Menu (Timers)»” are temporarily ignored for the durati on of the Boost mode.
•
The “Boost” mode cannot be started or stopped in the following conditi ons:
-
if the chlorinator is stopped,
-
if the chlorinator is connected to an automati on system (the “Boost” mode is then driven from the automati on
system user interface).
