background image

10

EN

 3.1.2 “Low” mode

If your pool has a covering system (shelter, shutt er, cover, etc.), “Low” mode is designed to adapt disinfectant producti on 

to situati ons where the pool is covered (lower needs).

This mode is also called “Shutt er” or “Winter” mode. Its eff ect is to limit disinfectant producti on to 10%.

Manual acti vati on (shelter, cover, winter use, etc.): 

• 

Press the 

 butt on: “LOW MODE 10%” is displayed on the screen and disinfectant producti on is reduced to 10%. 

•  To stop this mode: press the  

 butt on again.

Automati c acti vati on (compati ble electric roll-on cover): 

• 

Make  sure  the  cover  is  compati ble  and  connected  to  the  chlorinator  (see  “2.5.2  Connecti on  to  an  electric  roll-on 

shutt er”). 

• 

“Low” mode will automati cally be acti vated when the shutt er is closed.

• 

“Low” mode will stop as soon as the cover is completely open (aft er a ti mer of a few minutes).

“Low” mode cannot be started or stopped in the following conditi ons:

• 

if the chlorinator is stopped,

• 

if the chlorinator is connected to an automati on system but is not connected to a roll-on shutt er (“Low” mode 

is then driven from the automati on system user interface).

3.2 Settings

3.2.1 Clock Menu

The chlorinator is fi tt ed with an internal memory. When the appliance is fi rst switched on it is important to leave 

it powered on conti nuously for at least 24 hours in order to initi ally charge the accumulator (permanent separate 

power supply or fi ltering on permanently). Once loaded the accumulator has several weeks of autonomy in the 

event of a power failure.

• 

Power on the chlorinator and wait for the screen start-up sequence to complete.

• 

Press the 

 butt on to access the main menu.

• 

Use the 

 and 

 butt ons to reach the “CLOCK” line and press  

  to validate.

• 

Use the 

 and 

 butt ons to set the hour, then press 

  to memorise.

• 

Use  the 

 and 

  butt ons  to  set  the  minutes,  then  press 

 to memorise. The chlorinator  will then 

automati cally return to the main menu.

• 

Press the 

  butt on to return to the home screen.

The ti me is displayed in a 24 hour format.

Summary of Contents for TRi Series

















Reviews: