11
3.2.2 Programming Menu (Timers)
The chlorinator has two programmers to control
disinfectant producti on ti mes. These are called “Timers or
“Operati ng ti me intervals”.
•
“Timer” programming is used to defi ne the chlorinator operati ng ti mes within the fi ltering system opera-
ti on ti mes. The daily operati ng ti mes must be suffi cient to correctly treat the water.
•
A reminder of the calculati on rule (with a single speed fi ltrati on pump) : the ideal daily fi ltering ti me is
obtained by dividing the required pool water temperature (measured in °C) by 2. Example: for water at
28°C - 28/2 - 14 hours per day
• The chlorinator is fi tt ed with a safety device to prevent disinfectant overproducti on. It switches off the
appliance aft er 30 hours of conti nuous disinfecti on (no «Timers(s)» memorised and fi ltering in conti nuous
mode (manual mode)). Pressing the
butt on will restart producti on if necessary.
Creati ng a “Timer”
:
• On the home screen press the
butt on.
•
Use the
and
butt ons to reach the “PROGRAMMING” line, then press
to display the programming
setti ngs menu.
•
Use the
and
butt ons to select the ti mer to set (“TIMER 1” or “TIMER 2”), then press
.
•
Use the
and
butt ons to set the starti ng ti me hour, then press
to memorise.
•
Use the
and
butt ons to set the starti ng ti me minutes, then press to
memorise.
•
Use the
and
butt ons to set the stopping ti me hour, then press
to memorise.
•
Use the
and
butt ons to set the stopping ti me minutes, then press
to memorise. The chlorinator
returns to the “PROGRAMMING” menu automati cally.
•
The “T” symbol is displayed in the upper right hand corner of the LCD display on the home screen if the programming
is valid :
Deleti ng a “Timer”
:
• On the home screen press the
butt on.
•
Use the
and
butt ons to reach the “PROGRAMMING” line, then press
to display the programming
setti ngs menu.
•
Use the
and
butt ons to reach “RAZ TIMERS”, then press
. A message confi rming the deleti on will be
shown on the screen.
