![background image](http://html1.mh-extra.com/html/zodiac/futura-mark-2/futura-mark-2_manual_936167018.webp)
/ 10
8
INFLATING THE BOAT
NEVER PRESSURISE A
COMPARTMENT WHEN
THE OTHERS ARE
COMPLETELY DEFLATED
a
100 %
0 %
0 %
1
50 %
50 %
50 %
2
100 %
100 %
100 %
2-INFLATING THE HPP FLOORBAORD (if this option is selected)
1- Inflate
with the lever in
position
A
until handling becomes hard.
2-Finish
inflation in
position
B
until the recommended pressure is reached (800 mb).
3-INFLATING THE KEEL / DAMPING BUOYANCY MECHANISM
•
Once the floor is assembled,
start inflating using the bases located on the transom (pressure =
240 mb (3.48 PSI), see "PRESSURE" section).
Inflation base
Inflating is complete:
fit the inflation valve caps tight.
NOTE:
A slight air leak is normal before the valve cap is screwed on.
ONLY THE VALVE CAPS CAN ENSURE FINAL AIR TIGHTNESS
.