![background image](http://html1.mh-extra.com/html/zodiac/futura-mark-2/futura-mark-2_manual_936167016.webp)
/ 10
6
INFLATION SYSTEM
THE HIGH PRESSURE FOOT-PUMP
A
B
Position A (CAP INSERTED)
The pump has maximum flow but low
pressure: this position is used to give
shape rapidly to all inflatable parts of
the boat.
Position B (WITHOUT CAP)
The flow is inferior to position
A,
but
provides pressure that is superior, with
the same effort.
Position C
To deflate. Insert the tube as indicated
in figure C and pump normally.
C
THE STANDARD VALVES
(
1
) cap (
2
) valve insert (
3
) base
To activate the standard valves into inflation
position:
•
Free the valve insert from its protection.
•
Unscrew the valve cap.
•
Screw the valve insert onto its base (screw it tight
but without exaggeration, not to deteriorate the
screw thread) and check that the valve cap
remains accessible.
To deflate:
Unscrew the valve insert from its base
1
2
3
EASY PUSH VALVES
To activate the easy push valves:
To change position
In inflating position
In deflating position
Push
The membrane is closed, the knob
is up
The membrane is open,
the knob is down
NOTE:
NEVER TIGHTEN TOO MUCH: YOU COULD UNSCREW THE ENTIRE
INTERNAL INFLATION SYSTEM OF THE VALVE