ZMC306N Motion Controller User Manual V1.5
The Ethernet port of the controller can be connected point-to-point with a computer,
HMI, etc. through an Ethernet cable. The schematic diagram is as follows:
The controller can also be connected to the interchanger through an Ethernet cable,
and connected to other devices through the interchanger to realize multi-point
connection. The schematic diagram is as follows:
3.9.
RTEX Bus Interface
ZMC306N motion controller has 2 100M RTEX communication interfaces, which
support RTEX communication protocol, TX is the sending side, RX is the receiving side.
RTEX bus is used to connect Panasonic RTEX servo drive, please see below pin definition.
Summary of Contents for ZMC306N
Page 1: ......
