ZMC306N Motion Controller User Manual V1.5
3.2.2.
Basic Usage Method
(1)
Please follow the above wiring instructions for correct wiring.
(2)
After power on, please use any of the three interfaces ETHERNET, RS232, and RS485
to connect to ZDevelop;
(3)
Please use the "ADDRESS" and "SETCOM" commands to set and view the protocol
station number and configuration parameters, see "ZBasic Programming Manual" for
details.
(4)
Please use the "CANIO_ADDRESS" command to set the master's "address" and
"speed" according to the needs, and use the "CANIO_ENABLE" command to enable or
disable the internal CAN master function, or through "ZDevelop/Controller/State the
Controller/Communication
Info” to
view the CAN status intuitively, and refer to the
“ZBasic Programming Manual” for details
.
(5)
Correctly set the relevant parameters of the third-party equipment according to their
respective instructions to match the parameters of each node.
(6)
Correctly set the "address" and "speed" of the slave expansion module according to
the manual of the slave.
Summary of Contents for ZMC306N
Page 1: ......
