XPCIE1028 Motion Control Card User Manual V1.0
Chapter III Wiring, Communication
Configuration
3.1.
IO Power Interface
Power input of IO signal terminal uses DC24V power supply, it is connected through PIN1
(E24V) and PIN2 (EGND).
If ACC37-7103 wiring board is used, which also needs to be supplied by DC24V power,
and it is connected through PIN66 (EGND) and PIN67 (E24V) of the 5.08mm screw-type
wiring terminal.
→
Specification:
Item
Description
Voltage
DC24V(-10%~10%)
The current to open
≤0.5A
The current to work
≤0.4A
Anti-reverse connection
Valid
Overcurrent Protection
Valid
3.2.
IO Signal Interface
P700 and P701 are main interfaces for motion control and IO signal control of XPCIE1028.
Below shows P700 and P701 signal terminal:
