XPCIE1028 Motion Control Card User Manual V1.0
Chapter V Installation
5.1.
XPCIE1028 Installation
Install steps:
1. Turn off the power to the computer.
2. Open the computer case, select a free PCI card slot, and use a screwdriver to remove
the corresponding baffle strip.
3. Insert the motion control card into the slot securely, and tighten the fixing screws on
the baffle strip.
4. Remove a baffle bar adjacent to the slot, and fix the adapter board on the slot of the
chassis with screws.
5.2.
Drive Program Installation
It is used with the card.
Method 1: install automatically
Use the built-in installation wizard software dpinst_amd64.exe in the driver directory to
automatically install, and the specific operation is according to the software guide.
