XPCIE1028 Motion Control Card User Manual V1.0
6
EA0-
Encoder input
16
PUL0+
Servo pulse output
7
GND
Internal ground
17
GND
Internal ground
8
ALM_0/IN28
Drive alarm
18
CLR_0/OUT33
Alarm clear
9
INP_0/IN29
On-position signal
19
ENA_0/OUT32
Drive enable
10
EGND
External power ground
20
E24V
+24V output
Note:
⚫
When ALM_0, INP_0, CLR_0 and ENA_0 are not used, they can be used as general IO without
overcurrent protection.
⚫
The maximum output current of XPCIE1028 is 300mA, which can be directly connected to most
of loads. Please calculate the current.
⚫
The IO port of XPCIE1028 is an isolated IO port, please input the power supply of the IO port
from EGND and E24V.
3.4.
X300 Signal Interface
X300 interface is IO signal control interface, using ACC37-7103 adapter board to connect
to external equipment, this adapter board is optional for more IOs. And it needs to be
supplied by DC24V.
→
Interface Appearance
3.4.1.
ACC37 Wiring Board
ACC37 is the wiring board of X301 signal, using adapter board and DB37 to connect X301.
