Pelletherm V.2 M01 52
FAILURE
CODE
MESSAGE INDICATED ON
THE DISPLAY
FAULT DESCRIPTION
TROUBLESHOOTING
24
[ERROR: LOST FIRE] [IN
COMBUSTION]
Loss of lightness of photosensor
during work and unsuccessful
new ignition
Seek service assistance.
25
[ERROR: SCRAPER]
[OPERATION]
The board of the self-cleaning
mechanism is not working or
motor mechanism
Seek service assistance.
26
[ERR: SCRAP.STUCK]
[TURN OFF 5 MIN]
Self-cleansing mechanism is
blocked in an unknown situation
Seek service assistance.
27
[ERR: SCRAP.STUCK]
[OUTWARDS]
Self-cleansing mechanism is
blocked in forward motion
Seek service assistance.
28
[ERR: SCRAP.STUCK]
[INWARDS]
Self-cleansing mechanism is
blocked in backward motion
Seek service assistance.
29
[ERROR: SENSOR B] [LOW
TEMP]
The temperature sensor B has
measured value under 5
o
C
The circulation water is with
dangerously low temperature and
is possible its freezing point.
Seek service assistance to check
the heating installation.
30
[ERROR: SENSOR B]
[OVERHEAT]
The temperature sensor B
measured value over 95
o
C
Circulating water is with
dangerously high temperature
and possible overheating of the
heating system and equipment.
Seek service assistance to check
the heating installation.
31
[ERROR: SENSOR C]
[LOW TEMP]
The temperature sensor C has
measured value below 5
o
C
The circulation water is with
dangerously low temperature and
is possible its freezing point.
Seek service assistance to check
the heating installation.
32
[ERROR: SENSOR C]
[OVERHEAT]
The temperature sensor C has
measured value over 95
o
C
Circulating water is with
dangerously high temperature
and is possible overheating of
the heating system and
equipment.
Seek service assistance to check
the heating installation.
33
[ERROR: FAN 2] [ALWAYS
ON]
Flue gases fan can not be
stopped, possible damage at the
controller exit
Seek service assistance.
34
[ERROR: FAN 2] [STOPP]
Flue gases fan does not rotate
Seek service assistance.
35
[ERROR: FAN 2 RPM] []
Flue gases fan does not rotate
with the desired speed
Seek service assistance.
