Pelletherm V.2 M01 31
Figure 6.2. Panel with connectors for connection and control of the boiler.
The electrical panel with connectors is mounted in the rear part of the boiler. Elements of the
panel and their function are as follows:
Power switch "POWER" - serves as a central switching on and off the hot-water boiler
"Pelletherm V.2 M01";
Connector - Room thermostat – serves for connecting of a room programmable
thermosta, by which operation of the boiler can be managed. This thermostat is an
option, and is not available in the standard equipment of the boiler;
Electrical fuse - Central fuse on the control panel of the boiler;
Connector - circulation pump;
Connector – Power supply - 230VAC, 50Hz.
The designation of the electrical connectosr mounted on the interface panel of the boiler (on
its rear side) are shown in Figure 6.3.
Power switch
„POWER”
Room thermostat
Power supply –
230VAC, 50Hz
Circulation pump
Safety fuse
