Pelletherm V.2 M01 24
The manufacturer reserves the right to change the construction of the
modules of the boiler without the need to give prior notice to the client for this.
5.2.4. CONNECTING TO THE CHIMNEY.
After installation and leveling of the boiler (by leveling screws available at the base of the
heat exchanger and fuel bunker), it must be connected to the chimney by observing the
requirements for effective and reliable operation of the system.
5.2.5. CONNECTING TO THE HEATING SYSTEM.
The following figures present the connection of the hot-water pellet boiler "Pelletherm V.2
M01" to the heating system by appropriate fittings and fixture – made according to the
prepared thermal-technical project.
Figure 5.2. View to the input/output orifices of hot-water boiler "Pelletherm 30 V.2 M01".
