Shanghai ZLAN Information Technology Co., Ltd Tel: +86-17321037177 http://www.zlmcu.com
63
Figure 53 Configure Register Packet
The difference with the REAL_COM protocol is that the register package is enabled,
and fill in the register package information such as 31 32 33 34. Notice that this is
the hexadecimal, which is the actual number of data that you're sending is a string of
1234. If you need a string display, click the next "ASCII" option.
When the device is connected to the cloud software, a hexadecimal register
package of 31 32 33 34 can be automatically sent. This type of register package is
flexible and allows the device to adapt to the existing cloud register package format;
However, there is no such wildcard as a MAC in the register package, and different
registration packages need to be configured separately for each device. The above
two methods of sending MAC address and REALCOM have same configuration for
each device, but because the MAC is different the register packages different.
The longest registered package has a length of 33 bytes. This mode supports the
register package and heartbeat package of UDP mode.
8.1.4 Transcode Configuration File
ZLAN 5143 series support "transcoding" function, the function can write a a
transcoding configuration form for the serial device server, so as to realize fully
customizable user registration package, and you can use MAC address wildcard,
can solve the problem of writing custom register package for each device, and there
is no limit to the register package length.
The specific use method can consult ZLAN about "transcoding" function
configuration, or refer to 10 Transcoding Function.