Shanghai ZLAN Information Technology Co., Ltd Tel: +86-17321037177 http://www.zlmcu.com
49
Figure 37 UDP Mode Parameter Configuration
5.2.6 Pair-Connection Mode
If the host is not a Socket program (SocketDlgTest) or ZLVircom, but the two devices
are connected via the Ethernet port, the configuration method is similar. First, users
need to connect two devices and the computer to the same LAN. This computer
runs ZLVircom (or ZLDevManage), it is just to configure, after configuration there no
need to connect.
Click on ZLVircom's Device Manage to find these two devices, as shown in figure 39.
Then click "device edit" to configure the device. Device pair-connection can be
divided into TCP pair-connection and UDP pair-connection. If it is a TCP
pair-connection, the parameters of the two devices are shown in figure 38. The
parameters shown by the arrow must correspond as the corresponding mode of
connection to the PC machine. After the success of the TCP connection, can return
to the "Device Manage" dialog to see the connection status, as shown in figure 39, if
the state of the two devices are "connected" say TCP link has been established
between the two devices.
Figure 38 TCP Device Pair-connection Configuration