ZK-D3180
User Manual
Copyright©2021 ZKTECO CO., LTD. All rights reserved
.
P a g e
|
41
Abnormal open
In this mode, when the metal content exceeds the alarm threshold,
the machine will trigger the relay to output a switch signal when
the machine alarms;
None
Means that the relay is always in the off state and does not output a
switch signal.
Operation:
Press the
[OK]
button to enter the relay mode setting interface, then press the
[
▲
]/ [
▼
]
buttonto select trigger setting, press
[OK]
button to save and exit.
Custom ID
Select
Custom ID
on the System setting interface, and press
OK
to enter the custom ID setting
interface, as shown in the following:
The ID is the device ID (the default value is 123456).
Operation:
Press the
[OK]
button to enter the custom ID setting interface, then press the
[
▲
]/ [
▼
]
button to select setting item. Press the
[OK]
button to set the value of 0 to 9, select "confirm" and press
the
[OK]
button to save and exit.
