ZK-D3180
User Manual
Copyright©2021 ZKTECO CO., LTD. All rights reserved
.
P a g e
|
32
Function Description
Menu
Descriptions
All Zone
In the All Zone alarm mode, when the detected metal content reaches or
exceeds the set metal content, the area alarm light of the detected metal
will be serial lit, and an alarm will sound at the same time. Suitable for
normal mode.
Interval Zone
In the Interval Zone alarm mode, the zone warning lights that detect
strong metal content will light up at intervals, that is, two consecutive
zones will not light up at the same time. Facilitates identification and
focused detection of stronger zones by security personnel.
Single Zone
In the Single Zone alarm mode, only the zone with the strongest metal
content is detected and the alarm lamp lights up. Facilitate the security
personnel to precisely focus on the area for detection.
Operation:
Press the
[OK]
button to enter the alarm mode setting interface, then press the
[
▲
]/ [
▼
]
button to select, press
[OK]
button to save and exit.
8.7
Auto Testing
Select
Auto Testing
on the
Main Menu
interface, and press
OK
to enter this option where the
system self-checks its functions. As shown in the following:
Zone Test
Select
Zone Test
on the Alarm setting interface, and press
OK
to enter the partition test. The
test example is shown below.
