ZIVE LAB ZIVE SP2, Hardware Manual

Page: 21 / 46

ZIVE SP2 Instruction manual
- 21 -
D. ZIVE SP2 has information of each channel’s parameters and calibration data
E. Each channel is plug and play type.
F. Easy firmware upgrade
G. It is possible to extend multichannel system using several set of ZIVE SP2 using USB hub.
H. If there is PC power failure or USB cable is unplugged by accident, the experiment keeps going
and you can tranfer data from ZIVE SP2 memory any time.
I. Using DI port, external TTL system can be programmed.
J. K type thermocouple can measure temperature.
8. Device utility
Click on main tool bar or select device utility-system on menu
A. License registration
Note: From serial number R**********S , You must move interface board ROM write protection switch
direction to write enable direction inside of instrument
If you purchase optional software package later, you will receive license code then click “Registration
License” button.

Current license code will display on blank part as on the above.

You can input your new license code into this part and click “OK” button

One license code has several optional license key.