ZIVE LAB ZIVE SP2, Hardware Manual

Page: 27 / 46

ZIVE SP2 Instruction manual
- 27 -
C. DSP firmware update
To update dsp firmware; Select channel number.
Click “Select firmware file “button as the above and select firmware package(*.sfw), the you can see file
information at “ file information” at bottom side. The information of “Chip Information” section is for
firmware information inside of instruments. Please compare with two dates and only if target firmware’s date
is newer, try to update the firmware.
When you click “Upload” button, then update process will be started and you can see progress bar about
update progress.
Note: Do not other work during update progress..
When you finish update the firmware(s), close smuploader.exe program
If the update is finished, turn off the instrument and

You must set the ROM switch as write protected direction