ZIVE LAB ZIVE SP2, Hardware Manual

Page: 19 / 46

ZIVE SP2 Instruction manual
- 19 -
２ ) AC data monitoring
4. Checking points

Power line cables (PC, Monitor, Zive SP2, Printer etc.) should be for earth ground

No fault on system information of Windows 2000/XP/Vista/7/8 control panel

No virus in Software inside PC

Test ZIVE SP2 using dummy cell.
5. Installation
Refer to SM6 (Smart Manager) manual.
6. Caution
１
)
Hardware

DO NOT touch the counter electrode lead during a run.

DO NOT remove cell cable lead during a run.

DO NOT locate any noise sources(radio, monitor etc.) near the instrument.

DO NOT block the bottom or side ventilation panels.
PST: potentiostat mode
GST: galvanostat mode
Measured impedance value
|Z|
Voltage
range
Current
range
Frequency
phase
EIS: EIS mode