DRA-2 UNIVERSAL COMMUNICATION NODE
93/158
USER GUIDE - Rev.5 (January 2018)
5.14
SNMP CONFIGURATION
The equipment has an SNMP agent with the capacity to generate spontaneous messages
to control equipment, based on that protocol.
The agent admits the emitting of messages based on the SNMPv1 [3], SNMPv2c [4] and
SNMPv3 protocol, and the selection of the type of message,
trap
and
inform
.
Changes made to the SNMP agent configuration will
only
be active after
RESETTING
the equipment. The
Apply
command is not sufficient, and so the changes must
previously be saved using the
Save
command before requesting the reboot.
FIGURE 37
SNMP
menu
