DRA-2 UNIVERSAL COMMUNICATION NODE
126/158
USER GUIDE - Rev.5 (January 2018)
On pressing the Accept button a System symbol window will appear with the Telnet
programme connected to the equipment (see FIGURE 61).
FIGURE 61
Telnet
window
HyperTerminal
can be used as the
Telnet
graphic interface. To do this, when configuring the
connection select
TCP/IP (Winsock)
in the
Connect using
drop down menu.
Whatever the method chosen to establish connection with the equipment, the
equipment
login
prompt will appear
:
(where
equipment
will be the 3 letters that identify it.
E.g. dnr
login:
) ready for the user to enter the
login
and code for starting the session (the logins and
their respective passwords are the same as in the web interface).
B.2
USER CONSOLE COMMANDS
After starting the session with a valid login and password, the prompt will change to
equipment />
waiting for the user to enter a command.
The commands are instructions sent to the equipment to request or change a value or to
“browse” through the tree in which the equipment parameters are organised.
The following table shows a full list of available commands with a brief description of each
one and their availability depending on the type of user starting the session, highlighting the
most useful ones:
