DRA-2 UNIVERSAL COMMUNICATION NODE
37/158
USER GUIDE - Rev.5 (January 2018)
The second parameter,
Remote Syslog Level
, establishes the maximum severity level to
be sent to the Remote Syslog server. The range admitted is between 1 and 8. The default
value is 4. See information about the levels in the previous parameter.
The third parameter,
Syslog Log
, is a
Checkbox
control
.
By default, it is NOT selected,
which means that a remote server is configured and the traces are
NOT
stored in the local
Log. When the control is selected, the traces are sent to the remote server and are
also
stored in the local Log with the corresponding severity level.
The last parameter,
Syslog Server IP
, establishes the IP address of the Remote Syslog
server to which the information is sent.
The system can order the selective activation/desactivation of log information associated
to some operating blocks (see command
log
).
Through
CLI
it is possible to consult the local log files other than the current one (see
command
show
).
5.2
ADMINISTRATION
The equipment has an integrated http server for management purposes. The server
supports the http and the HTTPS protocols, and users can selectively enable their use and
the respective port.
FIGURE 16
Administration
menu
The procedure for the installation of the certificates is described in section B.4 of
Appendix B,
Data structure in CLI
.
