42
CHAPTER
REPAIRS AND TROUBLESHOOTING
ZIRKONZAHN – OPERATION AND MAINTENANCE MANUAL M1 MILLING UNIT COMPACT LINE – VERSION: 13/05/2021
E-BOX EXCHANGE
4GRNCEGOGPVOWUVQPN[DGECTTKGFQWVD[CSWCNKſGFGNGEVTKEKCPWPFGTVJGUWRGTXKUKQPQH
Zirkonzahn.
PRINTED CIRCUIT BOARDS EXCHANGE
4GRNCEGOGPVOWUVQPN[DGECTTKGFQWVD[CSWCNKſGFGNGEVTKEKCPWPFGTVJGUWRGTXKUKQPQH
Zirkonzahn.
FRONT PLATE EXCHANGE
Replacements must be carried out only under the supervision of Zirkonzahn. Pay attention to the
spring-loaded arm assembly when replacing the front plate!
LONG-TERM SHUTDOWN
If the machine is to be shut down for a long period of time, it must be ensured that:
- The coolant is drained.
- The milling unit is cleaned.
- The compressed air supply is removed.
/KNNKPIWPKVOWUVDGRTQVGEVGFHTQOFWUVCPFOQKUVWTGCPFUVQTGFCEEQTFKPIVQVJGURGEKſECVKQPUKP
the technical data sheet.
DISPOSAL
In case of dismantling, proceed in the reverse order of the equipment set-up. Follow the same
safety procedures (see „Installation").
The milling unit contains various electronic and electrical components which must be disposed
of in accordance with the legal regulations of the respective country. Under no circumstances the
milling unit must be disposed of it in the environment or in normal garbage.
