14
CHAPTER
USAGE
ZIRKONZAHN – OPERATION AND MAINTENANCE MANUAL M1 MILLING UNIT COMPACT LINE – VERSION: 13/05/2021
VQGZRQUWTGVQECTEKPQIGPUQTOWVCIGPUCVYQTMENCUUKſGUJCTFYQQFFWUVCUCECTEKPQIGPKE
substance in the EU. Therefore, during elaboration of wood and hardwood, consider that exposure
to these materials dusts is dangerous for the lungs and can be carcinogenic. A suitable extraction
unit and respiratory protection must be provided during processing. The collection and disposal
QHVJGIGPGTCVGFFWUVCPFQWVIQKPICKTOWUVEQORN[YKVJNQECNQHſEKCNTGIWNCVKQPU<KTMQP\CJP
assumes no liability for any damage to health caused by possible dust exposure in connection with
the milling unit.
Direct contact between rotating tools and the user is excluded when the system is used correctly.
NOT INTENDED USE
Uses that are not described in the chapter "Intended use" do not fall within the scope of intended
use. The manufacturer declines any responsibility for this.
Particular attention must be given to the following unintended and unauthorised uses:
- The machine is not conceived for processing sintered zirconia.
- The milling unit is not designed for operation in an explosive atmosphere and must not be used
in explosion-endangered areas.
- Important components of the milling unit work with oil-free compressed air (e.g. opening
the milling spindle). Operation without compressed air or with compressed air that does not
EQTTGURQPFVQVJGRCTCOGVGTUURGEKſGFKPVJGVGEJPKECNFCVCKUPQVRGTOKVVGF
-
5RGEKſEYGVRTQEGUUKPIRTQITCOOGUGZKUVHQTVJGGNCDQTCVKQPQHVKVCPKWOCPFQVJGTNKIJVOGVCNU
&T[OKNNKPIQHVJGUGOCVGTKCNUKUPQVRGTOKVVGFſTGJC\CTF
- Dry milling without a functioning suction unit increases the risk of dust exposure and is
therefore not permitted.
