13
CHAPTER
USAGE
ZIRKONZAHN – OPERATION AND MAINTENANCE MANUAL M1 MILLING UNIT COMPACT LINE – VERSION: 13/05/2021
INTENDED USE
The milling units of the M1 milling unit compact line were designed exclusively for the
manufacture of dental restorations, but can also be used for the production of jewellery.
Milling Unit
Dry processing
Wet processing
M1 Abutment
milling unit
-
Glass ceramics, composite, Raw-
Abutments
®
(precast titanium
abutments)
M1 Soft milling unit
Presintered zirconia, resin, wax,
wood, Sintermetall
Not available.
M1 Wet milling unit
Presintered zirconia, resin, wax,
wood, Sintermetall
Glass ceramics, composite
M1 Wet Heavy Metal
milling unit
Presintered zirconia, resin, wax,
wood, Sintermetall
Glass ceramics, composite, hard
metals such as titanium and
chrome-cobalt, Raw-Abutments
®
(precast titanium abutments)
*In principle, all Zirkonzahn materials are suitable for the corresponding categories. The
processing of third party materials in this system is not recommended due to the lack of
coordination regarding tools as well as milling strategies.
It is recommended to use only Zirkonzahn original burs with a 3 or 6 mm shank diameter,
depending on the used milling spindle.
For using this milling unit, a basic dental technical knowledge is required. The participation in a
CAD/CAM training course offered by Zirkonzahn is recommended.
The milling units of the M1 milling unit compact line can only be operated with a suitable
extraction unit (see technical data). Directive "2004/37/EC - Protection against the risks related
USAGE
