30
CHAPTER
OPERATION
ZIRKONZAHN – OPERATION AND MAINTENANCE MANUAL M1 MILLING UNIT COMPACT LINE – VERSION: 13/05/2021
power outlet.
08. Connect the USB cable to the All in One Touch PC and connect it to the milling unit.
CONNECTION OF THE MILLING UNIT
01. Connect the milling unit to the power supply.
02. Connect the milling unit with the USB cable to the PC.
03. Connect the milling unit with the LAN cable to the PC.
04. Connect compressed air line to milling unit.
05. Connect dust suction unit (not included in the supply) to milling unit (OUT MAX 1400 W).
06. Mount the extraction hose on the milling unit. The suction volume of the suction unit must
be at least 50 l/sec. (Outside diameter suction hose Ø = 45 mm).
CONNECTING THE GRINDCONTROL
Only required for M1 Abutment milling unit, M1 Wet milling unit and M1 Wet Heavy milling unit.
01. Connect the cooling liquid supply tube Ø 8 mm to the milling unit.
02. Connect the discharge tube Ø 30 mm to the milling unit.
03. Connect the Grindcontrol Basic with the power cable to the milling unit
(OUT GRINDCONTROL MAX 500 W).
10
09
12
11
M1 Wet Heavy Metal
milling unit rear
Internet access
