I L L U S I O N
35
Clean, simple installation.
4-40 rods and fiberglass pushrod tubes.
One pushrod brace in place.
Radio Box Installation
The radio box installs by sliding under the front
mount, and with the two 6-32 screws and washers
in the rear.
If you have trouble sliding the front mount in place,
you can use a file to clean the slot.
Pushrods
The throttle and steering pushrods are entirely up to
you.
We used some fiberglass tubes and 4-40 pushrods for
the steering, and a 1/16 braided steel cable with a liner
for the throttle (Sullivan S508 works well).
We supply two pushrod braces, plastic clamps and
6-32 screws, nuts and washers for bracing the
pushrods.
