I L L U S I O N
30
First servo rail installed.
Both rails in place.
Rear of box marked for throttle servo rails.
Glue one of the large servo mounts into the box,
aligning the top of the mount to your line.
You can use medium CA for this.
Extend your line 2-11/16 from the edge of the first
mount, and glue in the other mount.
Make sure it is level and parallel with the first
mount.
Check the fit of your servos.
Throttle servo
On the other end (rear) of the box, draw a line 1-1/2
inches from the bottom. This is where the top of the
throttle servo rails will be.
