I L L U S I O N
14
Radio box sides being glued.
Radio box sides glued as two assemblies.
Let’s build the radio box while the glue cures on the
hull.
Radio Box
Remove all of the radio box parts: Two long sides,
two short sides, the top and bottom, as well as the
1/8 ply top.
Sand all the parts smooth with 80.
Lay a piece of plastic wrap or waxed paper on your
bench.
Using CA, glue the two small sides to the two long
sides.
The small sides go between the long ones.
Use a square.
Put glue on the edges, and join the two box halves
on the bench.
Lightly sand the bottom of the box.
Glue on the bottom.
Lightly sand the top.
Skip ahead to the section on installing the
servos.
It is much easier to glue in the servo mounts
now, rather than after the radio box top is glued
on.
Once all servo mounts are in place, go to the
next steps.
