16
INSTALLATION INSTRUCTIONS & USER MANUAL
804428UK V1.03 OCT 2017 - ZIP EP HYDROTAP
TECHNICAL SUPPORT
TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
SECTION 5 TAP OPERATION
Indicator light
Select button
Safety button
Rotary
control
5.1 HydroTap Arc and Cube boiling ambient tap operation
On powerup, for Boiling Ambient models, select either red
illuminated BOILING with safety, or blue illuminated AMBIENT
water mode, by touching the select button.
The Arc / Cube control may be rotated in a forward or reverse
direction to dispense boiling or ambient water.
The rotary control is spring loaded in the forward direction and
when released, will return to the OFF position.
When rotated in the reverse direction the tap operates in a POT
FILL mode for a fixed period. To reset, return the control to the
OFF position and repeat the step. The control has to be manually
returned to the OFF position.
When unattended, the control light will automatically default to the
AMBIENT(blue illuminated) mode after a short period.
To dispense boiling water
Touch the select button until the indicator, select and safety buttons illuminate
red, then touch the safety button twice until the three red lights flash (the lights
will flash for approx. 2 seconds if the tap control is not rotated, then the select,
safety and indicator lights will return to continually illuminated red.
After a short period the select and indicator lights will return to continually
illuminated blue as a safety precaution).
Boiling water may be dispensed by rotating the control while the three red
illuminated lights are flashing.
While dispensing boiling water, all three red illuminated lights will continue to
flash.
To dispense ambient water
Rotating the control when the indicator light is illuminated blue allows the
dispensing of AMBIENT water.
If illuminated red, touch the select button until the indicator light illuminates blue,
then rotate the control as above.
