SR981S/SR982S operation manual of solar pump station
Page 75 of 85
-----------------------------------------------------------------------------------------------------------------
►Press “ ” button, “HND6 off” displays on the screen,
H1 output manually set
►Press “SET” button, “HND6 on” displays on the screen,
H1 output is switched-on
►Repress “SET” again, “HND6 off” displays, H1 output is
switched-off
►Press “ESC” to exit setup H1
-------------------------------------------------------------------------------------------------------------------
Note:
when manual mode is activated, sign displays on the screen, after 15 minutes
all outputs are switched-off automatically, controller exits manual mode.
8.7 PASS Password set
Setup steps:
To access main menu PASS,
►Press “SET” button, “PWDC 0000” appears,
►Press “SET” button again, the left figure blinks, ask for
entering current password (factory set is “0000”)
►Press “ ”button to enter the first figure
►Repress “SET” button, the second figure blinks
►Press “ ”button to enter the second figure
►Repress “SET” button, the third figure blinks
►Press“ ” button to enter the third figure
►Repress “SET” button, the fourth figure blinks
►Press“ ” button to enter the fourth figure
►Press “SET” button, “PWDN 0000” shows on the screen,
ask for entering a new password, doing like above to enter
the new password
►Press “SET” button, “PWDG 0000” shows on the screen, ask for reentering the new
password, doing like above to reenter the new pa
ssword, “PWOK” shows on the screen to
indicate reentering password successfully.
►Press “ESC” button to exit set program or wait for 20 seconds to exit automatically.
