Making sausages
1. Mince the meat
Insert the worm shaft into the cutter housing , the plastic end first.(fig.11)
Place the separator in the cutter housing.
Place the sausage horn on the cutter housing and screw the ring on the cutter housing.
(Make sure the notches of the separator fit onto the projections of the mincer head.)
2. Attach the cutter housing to the motor unit.
3. Place the tray on the upright part of the cutter housing.
4. Now the appliance is ready for making sausages.
Put the ingredients in the tray. Use the pusher to gently push the meat into the cutter
housing.
Put the sausage skin in lukewarm water for 10 minutes. Then slide the wet skin onto
the sausage horn. Push the (seasoned) minced meat into the cutter housing. If the skin
gets stuck onto the sausage horn, wet it with some water.
HOW TO CLEAN YOUR APPLIANCES
Meat left behind in the cutter housing may be removed from the inside of the appliance by
passing a slice of bread through the cutter housing.
1. Before you clean the appliance, switch the appliance
off and remove the plug from the socket.(fig.12)
2. Press the release button and turn the whole cutter
housing in the direction of the arrow. Remove the
pusher and the tray.(fig.13)
3. Unscrew the screw ring and remove all parts of the
cutter housing. Do not clean the parts in the
dishwasher!
4. Wash all parts that have come into contact with meat
in hot soapy water. Clean them immediately after use.
5. Rinse them with clear hot water and dry them
immediately.
6. We advise you to lubricate the cutter unit and the
grinding discs with some vegetable oil.
Summary of Contents for ZLN 7856
