background image

USER'S OPERATING AND MAINTENANCE MANUAL

For all FLEETWOOD #8, #12, #22, #32 model meat grinders

SAFETY: READ ALL INSTRUCTIONS

Read this operator's manual  before using the machine. Failure to 
follow the instructions provided could result in personnel injury or 
equipment damage.

KEEP OUT OF REACH OF CHILDREN

This chopper is intended for commercial use only.

Operators must be 18 years of age or older, and trained to 
operate Equipment referenced in this manual.

CAUTION ! HAZARDOUS MOVING PARTS

FLEETWOOD FOOD SERVICE EQ.   NEWARK   N.J.   07104

36420.7-Janeiro/2009

SOLD WITHOUT HEAD.

                                    ONE YEAR LIMITED WARRANTY

    The original registered owner of this                                    product

should contact 

SKYFOOD EQUIPMENT LLC   

at 305-868-1603 for any 

warranty problems or service.  

SKYFOOD EQUIPMENT LLC 

will repair 

or replace parts at our option for period of one year if unit fails to perform due 
to  defects  in  material  or  workmanship.    Freight  if  required  is  at  owner's 
expense.    Warranty  does  not  include  misuse  or  damage  due  to  abuse  as 
determined by 

SKYFOOD EQUIPMENT LLC

 inspection.  Units that are 

70 lbs., or less are considered carry in and should be taken to an authorized 
service facility.

Please read all safety instructions.

SERIAL #______________MODEL_______________

DETACH AND KEEP TOP PORTION

-------------------------------------------------------------------------------------

LIMITED WARRANTY REGISTRATION

OWNERS NAME
BUSINESS
ADDRESS

MODEL #

SERIAL #

PURCHASED FROM

 FILL OUT ABOVE INFORMATION AND MAIL OR FAX 

TO 

SKYFOOD EQUIPMENT LLC:

Office:

 PO BOX 416702, Miami Beach, FL 33141-3230 – 

Phone: 305 868 1603– Fax: 305 866 2704

Sales & Warehouse:

 71 Bloomfield Ave, Newark, NJ 07104 – 

Phone: 973 482 5070 – Fax: 973 482 0725

 – 

TOLL FREE 800 445 6601

[email protected]

www.skyfood.us

Summary of Contents for 22







Reviews: