Ziegler PKT 452, Original Operating Instructions

Page: 52 / 64

52
Important !!! The above stated values only apply to LUPROSIL® or media with
similar properties.
At LUPROSIL® NC and NC 64, the flow rate values depend on the
temperature.
Table 3 (according to BASF)
Required quantities for Luprosil® (in %) for wet grain (whole grains), all grain
types including corn:
Moisture Content Conservation Period in Months
in % 1 1-3 3-6 6-12
Up to16 0,35 0,45 0,50 0,55
16-18 0,40 0,50 0,55 0,65
18-20 0,45 0,55 0,65 0,75
20-22 0,50 0,65 0,75 0,85
22-24 0,55 0,70 0,85 0,95
24-26 0,60 0,80 0,95 1,05
26-28 0,70 0,90 1,05 1,15
28-30 0,80 1,00 1,15 1,30
30-32 0,90 1,10 1,25 1,45
32-34 1,00 1,20 1,35 1,60
34-36 1,10 1,30 1,50 1,75
36-38 1,25 1,45 1,65 1,90
38-40 1,40 1,60 1,80 2,05
40-42 1,55 1,75 1,95 2,20
42-44 1,70 1,90 2,10 2,35
44-46 1,85 2,05 2,25 2,55
46-48 2,00 2,20 2,40 2,75
48-50 2,15 2,35 2,60 2,95
If it is intended to further convey acid-conserved grain with a grain blower
immediately following the treatment, an intermediate storage of one hour is required.
If the immediate
downstream connection of the blower to the dosing device can not
be prevented, the required quantity stated in the table must be increased by at least
10 % according to BASF.