12
SAFETY
2.
2.1 MARKING OF INFORMATION IN THE OPERATING INSTRUCTIONS
The safety information provided in these operating instructions (failure to follow them can result in the
endangerment of persons) is marked with general danger symbols:
2.2 MARKING OF THE DANGER WARNINGS
Danger!
DANGER! – Nature and source of the danger!
Impact: Danger to life or of serious injuries.
Measures for danger prevention
Warning!
WARNING! – Nature and source of the danger!
Impact: Injury, serious damage to material.
Measure for damage limitation
Caution
WARNING – Nature and source of the danger!
Impact: Material damage
Measure for damage limitation
Please note
PLEASE NOTE – Nature and source of the danger!
Impact: Economic use of the machine
Measures to be performed
Environment
PLEASE NOTE – Nature and source of the danger!
Impact: Pollution
Measures to be performed
Warnings placed directly on the machine always require compliance and are to be maintained
in a completely legible manner.
2.3 Personnel qualification and training
The machine may only be used, serviced and repaired by those persons who are familiar with it and
have been informed of the dangers which it presents. The owner is to establish clearly the areas of re-
sponsibility and monitoring of personnel. Personnel lacking any requisite knowledge must be trained
and instructed. The owner is to ensure that the personnel have read and understood entirely the
specifications of the operating instructions.
Repair work not described in these operating instructions may only be performed by an authorized
specialist workshop.
2.4 Dangers for failure to follow the safety information
Failure to follow with the safety information can result in hazards for persons, the environment and the
machine itself. Failure to follow the safety information can result in loss of all liability cover.
Non-compliance can result in the following hazards:
Hazards to persons through unsecured working areas
The failure of important machine functions
The failure of the prescribed methods of maintenance and repair
The endangerment of persons from mechanical and chemical influences
Environmental hazards resulting from the leakage of hydraulic oil
