56
Fig. 101
Insert the feather key on the shaft
Fig. 102
Tighten the sprocket and secure with the circlip
Install the shaft in the drive gearbox, place the
bearing on the outside of the shaft
Fig. 103
Please note: place on the inner bearing with the
lock collar side facing towards the inside of the
picker
Install the flange bearing on the left-hand side,
starting on the inside (first introduce the 6 KT
screw into the cavity from inside then secure the
flange bearing on the right-hand side)
Fig. 104
Tighten the bearing screws crosswise
