44
Fig. 71
Roller chains
The roller chains fitted for the cross auger are to be
kept rust-free during storage.
The pertinent recommendations regarding caring for
the roller chains apply.
Fig. 72
Storage
The cornheader is best stored in a well-ventilated
hall, either standing in its transport frame or placed
down on dry ground.
Protect all bare metal parts from rust.
Load handling attachments may only be used for
their intended purpose. All changes or the use with
other machines is forbidden.
Do not store the cornheader on the com-
bine harvester when raised.
Avoid unnecessary loading of the har-
vester tyres.
Fig.. 73
Picking row drives
Should the picking cylinder shafts (G) be dismantled,
these are to be greased with conventional graphite
grease when refitted.
Clean the gear ventilator from time to time. Should
any oil be lost from the drive bearings, check the
function of the vent.
Drive connections
Check the well-protected drive connections between
the picking rows for their state.
G
